Voco Polofil Supra Syringe Refills

Voco Polofil Supra Syringe Refills

₹1,050.00 ₹2,100.00 -50%
Brand: Voco
Product Code: VOCO-PSSR
Availability: In Stock

OverView

...

Available Options

Light-curing Composite

Polofil Supra :

Light-curing microhybrid composite with Sintraglass multifiller system

INDICATIONS:

  • For cavities classes I to V
  • Reconstruction of traumatically affected anteriors
  • Veneering of discoloured anteriors
  • Splinting, locking of teeth

FEATURES:

  • Combines the advantages of micro-filled and macro-filled composites
  • Non-sticky, good packability
  • Abrasion-proof and stable shades
  • Low shrinkage
  • Durable and resistant restorations
  • Low water uptake

 

INDICATIONS:

  • For cavities classes I to V
  • Reconstruction of traumatically affected anteriors
  • Veneering of discoloured anteriors
  • Splinting, locking of teeth.

  • KEY SPECIFICATIONS :

  • For fillings of more than 2 mm, apply and polymerise in layers (cure each layer for approx. 40 - 60 s).
  • To light-cure this material conventional polymerisation devices are suited.
  • The light output should be a minimum of 500 mW/cm2 on halogen polymerisation devices and 300 mW/cm2 on LED devices.
  • The curing depth, depending on the shade, is approx. 2 - 5 mm, when polymerised for 60 s. The curing depth is approx. 2 - 3 mm for translucent shades, if light-curing is done through enamel (approx. 1 mm). Transparent strips, crowns and/or Iight wedges should be used.
  • Care should be taken to ensure good marginal adaption.
  • Hold the light source of the halogen light as close as possible to the surface of the filling. If the distance is more than 5 mm, the curing depth may compromise. Polymerisation may be limited to the area of the cone of light only.
  • Insufficient curing can lead to discolouration and pulp irritation.
  • The filling can be finished and polished immediately after removing the transparent strips/crowns (fine or extra-fine grain diamond, polishing discs).
  • During finishing and polishing the filling must be cooled.
  • The margin of the filling, or even better the entire tooth, should be fluoridated as a final step.
  • Polofil Supra can be used for direct and indirect inlays according to the customary methods.
  • The physical stability values can be improved by usual external (additional) curing.
  • Store at temperatures between 4°C - 23°C.
  • Syringes and bonding material bottles should be closed immediately after dispensing to prevent exposure to light.

  • PACKAGING :

  • 1 Refill syringe - 4g

Write a review

Note: HTML is not translated!
    Bad           Good