Dmg Tray Adhesive

Tray Adhesive

Tray adhesive for adhesion between A-silicones with metal and plastic trays.

INDICATIONS:

• For adhesion addition curing silicone impression materials (PVS) with minimal or non-retentive impression trays (metal, plastic)

CONTRAINDICATIONS:

• Do not use the material in cases of allergies to any of the ingredients or, as can occur in rare cases, in the event of contact allergies.

COMPOSITION:

• Silicone resin
• Solvent (volatile paraffin)

KEY SPECIFICATIONS :

Basic safety instructions

• For dental use only!
• Keep out of reach of children!
• Do not swallow. In the event of unintentional ingestion, seek advice from a doctor
• Highly flammable. Keep away from naked flames
• Do not inhale vapors. In the event of unintentional inhalation, likewise seek advice from a doctor
• Avoid contact with skin and eyes! In the event of accidental contact, immediately rinse thoroughly with plenty of water and consult a physician if necessary

DIRECTIONS TO USE :

STEP 1: Ensure that the impression tray is clean, free of grease and dry.

STEP 2: Using a brush, apply a thin, even layer of the tray adhesive to the on the impression tray.

STEP 3: Leave the tray adhesive to work for 3:00 min.

STEP 4: Add the impression material to the tray within 30 min.

PACKAGING:

• 1 x 10 ml Bottle